Newport Brass 1200_5613 Metropole Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
7-5/16 in. (18.6 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
1200-5613/011200-5613/0341200-5613/03N1200-5613/041200-5613/061200-5613/071200-5613/08A1200-5613/101200-5613/10B1200-5613/151200-5613/15A1200-5613/15P1200-5613/15S1200-5613/201200-5613/241200-5613/24A1200-5613/24S1200-5613/261200-5613/301200-5613/521200-5613/561200-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0760724478836076072454876807607244788430760724478867076072447000707607244688440760724478881076072447890407607244689050760724470014076072447892807607245686500760724470021076072446885107607244789350760724478942076072447643607607244688200709180175750076072447644307607244764670760724476498