Newport Brass 3180_5613 Seager Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3180-5613/013180-5613/0343180-5613/03N3180-5613/043180-5613/063180-5613/073180-5613/08A3180-5613/103180-5613/10B3180-5613/153180-5613/15A3180-5613/15P3180-5613/15S3180-5613/203180-5613/243180-5613/24A3180-5613/24S3180-5613/263180-5613/303180-5613/523180-5613/563180-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180111475070918011148207091801114990709180111512070918011152907091801115360709180111543070918011156707091801115740709180111598070918011160407091803040820709180111611070918011162807091801116350709180111642070918011165907091800895070709180181027070918011167307091801116970709180111727