Newport Brass Chesterfield Hot & Cold Water Dispenser Antique Copper - 1030-5603/08A
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/2 in. (16.5 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
Weight per Each: 4.6 lbs
Length per Each: 17 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
1030-5603/011030-5603/0341030-5603/03N1030-5603/041030-5603/061030-5603/071030-5603/08A1030-5603/101030-5603/10B1030-5603/151030-5603/15A1030-5603/15P1030-5603/15S1030-5603/201030-5603/241030-5603/24A1030-5603/24S1030-5603/261030-5603/301030-5603/521030-5603/561030-5603/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0760724621515076072462155307607246215910760724621676076072459938807607246217130760724621751076072462183607607246218740760724621959076072462199707091801959010760724622031076072462215407607246221920760724622239076072462227707607245993950709180175224076072462235207607246224370760724622550