Newport Brass Muncy Hot Water Dispenser Oil Rubbed Bronze - 3290-5613/10B
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary Knurled lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3290-5613/013290-5613/0343290-5613/03N3290-5613/043290-5613/063290-5613/073290-5613/08A3290-5613/103290-5613/10B3290-5613/153290-5613/15A3290-5613/15P3290-5613/15S3290-5613/203290-5613/243290-5613/24A3290-5613/24S3290-5613/263290-5613/303290-5613/523290-5613/563290-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180193754070918019376107091801574730709180159309070918015931607091801937850709180193792070918015932307091801938150709180157466070918019383907091803052700709180159675070918019384607091801938530709180193860070918019387707091801585480709180193884070918019390707091801939210709180193952